Serving the Montgomery area  ·  (334) 781-4583  ·  Open Mon-Sun 7am-7pm
📞 (334) 781-4583 Free Quote

Metal Roofing in Millbrook, AL (36054) · Local Professionals

Montgomery Metal Roofing · Fast response in Millbrook and the Montgomery area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Millbrook sits right off I-65 just north of Montgomery, and a lot of the homes here are 1980s to 2000s brick ranches and two-stories with original asphalt shingles that have baked through twenty or thirty Alabama summers. The humidity and heat here grow algae streaks across those roofs and curl the shingle edges, so reroofs are a constant conversation in neighborhoods off Highway 14 and around Millbrook Middle School.

Homeowners in 36054 call Montgomery Metal Roofing because we know what this climate does to a roof. We are based in Montgomery, fully insured, and a Metal Roofing Alliance Member, and we handle everything from a metal roof over shingles retrofit to gutter work on the homes around the Millbrook Civic Center. If your shingles are tired and you want a roof that sheds heat and algae instead of holding them, we can walk your property and give you a straight answer.

Metal Roofing in Millbrook (36054)

Millbrook is mostly flat to gently rolling ground along the Alabama River bottomland, and that matters for roofing. Lots are generous but many sit on clay-heavy soil that holds water after a storm, so we pay close attention to gutter discharge and how water leaves the roof at the eaves. The tree canopy here is a real factor too: tall loblolly pines and water oaks drop limbs and needles that clog valleys and scratch shingle granules, and we see plenty of punctures and wind-lifted panels after spring and late-fall storms roll through Dixie Alley. Homes near the river corridor also deal with humidity that never really lets up, which is exactly why so many Millbrook owners are moving to standing seam and stone-coated steel instead of another round of asphalt.

Our team has worked across the River Region, from Old Cloverdale and Cottage Hill down to Prattville and Pike Road, and we bring that same crew and insurance coverage to Millbrook. We know the local building department has its own permit thresholds and inspection steps, and we handle that paperwork so you are not chasing it yourself.

Our services in Millbrook

How a Job Works in Millbrook

Step 1: You call (334) 781-4583 and we set up a free on-site assessment. We get on the roof, check fasteners, seams, flashing, and decking, and we look at your attic ventilation and gutter flow. You get a written scope and a clear price before anything starts.

Step 2: We pull the permit and schedule the work. In Millbrook, many homes have a driveway and side yard tight enough that we stage panels carefully and keep the crew to one side of the house at a time. If your neighborhood has an HOA or design review, we coordinate panel profile and color approval before we order material.

Step 3: We clean up daily, magnet-sweep for screws and metal shavings, and do a final walkthrough with you. We leave the property clean and show you exactly what was done, including any flashing or gutter work.

Pricing in Millbrook depends on roof size, pitch, access, and condition. As a ballpark, metal roof over shingles (retrofit) starts around $7 per square foot, corrugated and ribbed panel roofing around $5.50, and standing seam around $10. A full metal roof replacement starts around $9 per square foot, while installation on new construction or a tear-off starts around $8. Smaller jobs are priced separately: metal roof repair and leak repair start around $450, screw replacement and re-fastening around $750, flashing and chimney or skylight repair around $600, and gutters for metal roofs around $9 per linear foot. Coating and painting starts around $2.50 per square foot. The biggest swings come from how many existing shingle layers you have, how steep the roof is, and whether storm damage means part of the job is emergency work. Call (334) 781-4583 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Millbrook and nearby areas.

My Millbrook home has two layers of old shingles. Can you still do a metal roof over shingles retrofit?
Often yes, but code limits how many existing layers you can cover, and we have to verify the decking and fasteners underneath. We inspect first and tell you honestly whether a retrofit or a full tear-off is the right call for your house.
A storm just lifted panels on my roof in Millbrook. How fast can you get out?
We prioritize active leaks and storm damage in Millbrook and the surrounding Montgomery area. Call (334) 781-4583, and we will schedule an inspection, document the damage for your insurance claim, and make temporary repairs if needed.
What does a typical metal roof cost for a Millbrook ranch home?
Most Millbrook ranches fall in a range where a retrofit runs around $7 per square foot and standing seam around $10, but size, pitch, and the number of shingle layers move that number. We give you a written price after the free inspection.
Do I need a permit to replace my roof in Millbrook?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary. We verify the current rules with the local building department and pull the permit for you. You can also check the City of Millbrook website at https://www.elmoreco.org for general city information.
My neighbor's tree limbs hang over my roof in Millbrook. Who handles that?
Property line and overhang issues are between neighbors, so we do not cut trees that are not yours. We can document damage from fallen limbs for insurance and repair the roof, and we recommend talking with your neighbor before any trimming.
Are you insured for work on my Millbrook property?
Yes. We carry general liability and workers' compensation coverage, and we are happy to provide proof before we start. That protects you if anything goes wrong on your property.
What maintenance should Millbrook homeowners do between storms?
Keep pine needles and leaves out of valleys and gutters, check fasteners and sealant at flashing once a year, and wash off algae streaks before they hold moisture. In this heat and humidity, a quick annual inspection catches small leaks before they reach your ceiling.
Why choose us?

Trusted professionals in Montgomery

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Montgomery

All your work handled by qualified professionals in Montgomery

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Montgomery

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Montgomery · Response within 24h · No commitment · ☎ (334) 781-4583

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Montgomery ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm