Serving the Montgomery area  ·  (334) 781-4583  ·  Open Mon-Sun 7am-7pm
📞 (334) 781-4583 Free Quote

Metal Roofing in Wetumpka, AL (36092) · Local Professionals

Montgomery Metal Roofing · Fast response in Wetumpka and the Montgomery area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wetumpka sits right where the Coosa and Tallapoosa rivers meet, and if you drive through downtown or the older neighborhoods off Main Street, you'll see a mix of historic homes and newer builds that have gone up since the January 2019 tornado. That storm changed a lot for folks here, and it's why so many homeowners are now asking about wind-rated metal roofs that can handle what Alabama weather throws at them.

We're Montgomery Metal Roofing, and we've been working in Wetumpka and the surrounding 36092 area for years. Whether you're near the Wetumpka Civic Center or out toward the river bottomland, we know the local conditions, the permit process, and the kind of storm damage that shows up after a spring squall line rolls through.

Metal Roofing in Wetumpka (36092)

Wetumpka's terrain is rolling, with the Alabama River cutting through and plenty of mature live oaks, water oaks, and tall loblolly pines shading older homes. That shade is nice in July, but it means limbs come down on roofs during storms, and the debris keeps gutters and valleys clogged. A lot of the housing stock here ranges from early 1900s bungalows near downtown to post-war brick ranches and newer construction out toward the bypass. Many of these homes have steep pitches and complex rooflines, which means flashing details around chimneys and dormers need to be done right the first time. We also see a fair amount of farm and agricultural buildings on the outskirts, where corrugated and ribbed panel roofing is common and practical.

Our team has worked on everything from historic homes near the Elmore County Courthouse to metal roof retrofits over existing shingles in the neighborhoods around Jasmine Hill. We understand how wind-driven rain behaves here and how to fasten panels so edges don't lift when a storm blows through.

Our services in Wetumpka

How a Job Works in Wetumpka

Step 1: You call us at (334) 781-4583 or fill out our contact form, and we schedule a free on-site assessment. We'll walk the roof, check for loose fasteners, separated seams, flashing gaps, and any storm damage, then give you a written estimate with options that fit your budget.

Step 2: Once you approve, we pull the required roofing permit from the local building department. If your home is in a historic district or under an HOA, we'll help coordinate the design review so the panel profile and color meet the rules. On tight lots with steep driveways, we plan material delivery and staging carefully so we don't tear up your landscaping.

Step 3: After the work is done, we do a full cleanup, haul away old materials, and walk the property with you to make sure you're satisfied. We don't leave until you've signed off and the site is clean.

Pricing for metal roofing in Wetumpka depends on the size and complexity of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and a full replacement starts around $9 per square foot. If you're retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For a free estimate tailored to your home, call us at (334) 781-4583.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wetumpka and nearby areas.

My house is near the Coosa River and we get a lot of wind. Will a metal roof hold up better than shingles?
Yes, metal roofing generally performs better in high winds, especially when installed with the right fasteners and edge detailing. After the 2019 tornado, many homeowners in Wetumpka switched to standing seam or wind-rated panels because they resist lifting and peeling. We can assess your exposure and recommend a system that meets local wind requirements.
A storm just knocked a limb onto my roof and I think I have a leak. How fast can you get out to Wetumpka?
We offer free inspections for storm and wind damage and prioritize active leaks. Call us at (334) 781-4583, and we'll schedule a visit as soon as possible, often within a day or two depending on demand after a storm. We'll tarp if needed and give you a clear repair plan.
What's the typical cost to replace a roof on a 1,500-square-foot home in Wetumpka?
For a home that size, a basic metal roof replacement might run between $9,000 and $14,000 depending on the material, roof pitch, and whether we're removing old shingles. Standing seam or stone-coated steel will be toward the higher end. We provide a free estimate so you can see exact numbers for your property.
Do I need a permit to replace my roof in Wetumpka, and where do I go for that?
Yes, roofing permits are commonly required for a full replacement or re-roof in Wetumpka and Elmore County. The rules and fees vary, so it's best to check with the local building department. You can start by visiting the City of Wetumpka website at https://www.elmoreco.org for contact information and general guidance. We handle the permit application for you as part of the job.
My neighbor's tree hangs over my roof and I'm worried about liability if a limb falls. What can I do?
In Alabama, a property owner is generally responsible for maintaining trees on their own land, but if a limb from a neighbor's tree falls and damages your roof, it's usually your homeowner's insurance that responds. We recommend talking with your neighbor about trimming overhanging branches. If you're in an HOA, check the covenants for rules about tree maintenance and property lines.
Are you fully insured for roofing work in Wetumpka?
Yes, we carry general liability insurance and workers' compensation coverage for every job. We're happy to provide a certificate of insurance before we start work so you have peace of mind.
What kind of maintenance does a metal roof need in Wetumpka's climate?
Metal roofs are low maintenance, but in our humid summers and storm season, it's smart to have annual inspections to check fasteners, seals, and flashing. We also recommend keeping gutters clear of pine needles and leaves, especially if you have tall loblolly pines nearby. A quick check after major storms can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Montgomery

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Montgomery

All your work handled by qualified professionals in Montgomery

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Montgomery

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Montgomery · Response within 24h · No commitment · ☎ (334) 781-4583

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Montgomery ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm